sundewzer
Plastic
- Joined
- Oct 7, 2013
- Location
- Columbia Falls, MT
I have tried every speed, feed, doc, and woc combination I can think of and I can't get a good finish on steel. I even removed all the cutters but one and got pretty good results but they still need to be better.
EM https://www.amazon.com/Metaltech-Tools-Contouring-Coupling-490-0600/dp/B00LEZMS14
Insert RDMW0702M0 AH120
No matter what I try the swirls won't go away. The head is as trammed as I can get it. I even tipped it on purpose a couple thousands and there was no change.
Here is what I get will all the teeth.
Shared album - Casey Cotter - Google Photos
Here is the best I could get with one tooth, Shared album - Casey Cotter - Google Photos
I have never used a copy mill before, am I missing something obvious? My next plan was to try a different insert but the limited option don't seem to have much of a different geometry. Search Page
EM https://www.amazon.com/Metaltech-Tools-Contouring-Coupling-490-0600/dp/B00LEZMS14
Insert RDMW0702M0 AH120
No matter what I try the swirls won't go away. The head is as trammed as I can get it. I even tipped it on purpose a couple thousands and there was no change.
Here is what I get will all the teeth.
Shared album - Casey Cotter - Google Photos
Here is the best I could get with one tooth, Shared album - Casey Cotter - Google Photos
I have never used a copy mill before, am I missing something obvious? My next plan was to try a different insert but the limited option don't seem to have much of a different geometry. Search Page