Novice_Dave
Plastic
- Joined
- Nov 5, 2020
Hello Gentleman,
I asked for aluminum extrusion design advice a little while ago. Took notes, did my homework and below are my revised designs.
-Tried to keep the thickness as uniform as possible.
-No closed screw holes.
-tounge ratios don't exceed 3:1, I believe
Images below are revised designs, one clean and one with dimensions. Please feel free to critique from a cost and ease perspective. Any advice would be greatly appreciated.
I am hoping to do 6061 annealed so I can bend them into a rim. The deflection will surely be an item on the agenda in the future.
Thank you in advance.
I asked for aluminum extrusion design advice a little while ago. Took notes, did my homework and below are my revised designs.
-Tried to keep the thickness as uniform as possible.
-No closed screw holes.
-tounge ratios don't exceed 3:1, I believe
Images below are revised designs, one clean and one with dimensions. Please feel free to critique from a cost and ease perspective. Any advice would be greatly appreciated.
I am hoping to do 6061 annealed so I can bend them into a rim. The deflection will surely be an item on the agenda in the future.
Thank you in advance.