bennyboy75
Plastic
- Joined
- Sep 21, 2021
I am engraving some fine lines onto acrylic with a spring loaded diamond drag bit using my CNC 3018. The problem I have is that the line weights are inconsistent and I don't know how to solve this. I have tried every setting known to man but it still ends up with the same blotchy patches where the lines are engraved heavier in some parts than others. I am wondering if this is due to the surface of the acrylic not being completely flat but I thought it being a spring loaded engraver, the spring would compensate for this. My only other idea is whether a better CNC machine would do a better job. Anyway I'm scratching my head on this one. Hoping someone can offer some advice. Thanks.