kjones95206
Plastic
- Joined
- Jul 18, 2017
I have a Famco 6C (15 ton) arbor press that I am disassembling for cleaning and painting. I'm not sure how the cross shaft gears are removed. Are the two spur gears one cluster gear or two separate gears? Do I pull the right gear off of the shaft from left to right? How is the center gear removed?
I am reluctant to start pulling with a puller without a better idea of how it was assembled.
The second middle photograph is taken from the right side of the machine and the photograph on the far right is taken from the left side of the machine.
Thanks for your advice.
I am reluctant to start pulling with a puller without a better idea of how it was assembled.
The second middle photograph is taken from the right side of the machine and the photograph on the far right is taken from the left side of the machine.
Thanks for your advice.