Blazemaster
Hot Rolled
- Joined
- Oct 13, 2009
- Location
- Olympia, Wa
I have been looking into building a hydraulic press and slowly gathering material, have some good steel for a frame. I browse the free section on craigslist often and today this pump popped up. At least I think it's a pump. The guy I got it from said it came off a large press in a machine shop so was hoping I could reuse it for my press. Has anyone seen or used one similar to this?
The motor tag has been removed from the motor, but 3 phase wiring tag still remains. Looks to be about a 7.5hp motor. I can't seem to find anything on the company. The barrel is almost full to the top with clean oil. The gauge goes to 4500 psi, but is broken.
Is there anyway to figure out what kind of pressure this puts out? The lines are pretty hefty and everything looks to be in pretty decent shape. I guess I could look for a cylinder and hook it all up. I am pretty new to hydraulics. Also, not sure why the hell the pics came out sideways.
The motor tag has been removed from the motor, but 3 phase wiring tag still remains. Looks to be about a 7.5hp motor. I can't seem to find anything on the company. The barrel is almost full to the top with clean oil. The gauge goes to 4500 psi, but is broken.
Is there anyway to figure out what kind of pressure this puts out? The lines are pretty hefty and everything looks to be in pretty decent shape. I guess I could look for a cylinder and hook it all up. I am pretty new to hydraulics. Also, not sure why the hell the pics came out sideways.