TTalma
Aluminum
- Joined
- Aug 12, 2008
- Location
- FairPort, NY
I need to drill 14, 1-1/4" holes in 1/4" steel. I do primarily wood working and only have access to wood working tools.
I do have a good drill press. The minimum speed is 540 rpm (according to the tag). This seems to fast for a hole saw on steel. I'm thinking I would overheat whatever I was using.
Is there a bit or hole saw I can buy that would do the job. I doubt I will ever do this again so I don't want to break the bank doing this either!
Any advice would be greatly appreciated!
I do have a good drill press. The minimum speed is 540 rpm (according to the tag). This seems to fast for a hole saw on steel. I'm thinking I would overheat whatever I was using.
Is there a bit or hole saw I can buy that would do the job. I doubt I will ever do this again so I don't want to break the bank doing this either!
Any advice would be greatly appreciated!