Hi guys
I dont know if this is the correct sections to post this but I have an accurl shear that instead of cutting a 2mm thickness sheet is actually bending it
I have double checked the program the blades the nivelation of the machine and they are fine , the material Im triying to bend is black lamina I have noticed something tho
the machine cuts thicker sheets without issues
so I inspected the machine and noticed there is a gap in the cilinders of the top part in relation to the guide and according to my experience it shouldnt be any of that ( see picture attached)
any Ideas on how to fix this ?
I dont know if this is the correct sections to post this but I have an accurl shear that instead of cutting a 2mm thickness sheet is actually bending it
I have double checked the program the blades the nivelation of the machine and they are fine , the material Im triying to bend is black lamina I have noticed something tho
the machine cuts thicker sheets without issues
so I inspected the machine and noticed there is a gap in the cilinders of the top part in relation to the guide and according to my experience it shouldnt be any of that ( see picture attached)
any Ideas on how to fix this ?