Hi, I use one of these at my job.
https://www.iscar.com/eCatalog/item.aspx?cat=2300686&fnum=381&mapp=BO&app=0&GFSTYP=M&isoD=1
The tool is new. It's with ic908 inserts.
https://www.iscar.com/eCatalog/Grade.aspx?grade=IC908&item=6095389&fnum=229&mapp=BO&app=0
I can't find any feed recommendations. I need feeds for soft steel and austenitic stainless. Yes, we've used these a lot, and I do know what we normally use which would be 400rpm or 500rpm, F150mm/m or F300mm/m depending on the load. However I think there's room for optimizing.
Any suggestions welcome, also milling strategies.
https://www.iscar.com/eCatalog/item.aspx?cat=2300686&fnum=381&mapp=BO&app=0&GFSTYP=M&isoD=1
The tool is new. It's with ic908 inserts.
https://www.iscar.com/eCatalog/Grade.aspx?grade=IC908&item=6095389&fnum=229&mapp=BO&app=0
I can't find any feed recommendations. I need feeds for soft steel and austenitic stainless. Yes, we've used these a lot, and I do know what we normally use which would be 400rpm or 500rpm, F150mm/m or F300mm/m depending on the load. However I think there's room for optimizing.
Any suggestions welcome, also milling strategies.