doug8cat
Titanium
- Joined
- Jul 10, 2008
- Location
- Philadelphia
The Cincinnati Laner has a N2 counter balance for the Z axis. My charge and tank are low enough to where moving Z is causing too much current draw and faulting.
problem is the fill port is a 1/4 BSP schrader valve. I have no problem recharging, however finding a female fitting to mate with the aforementioned BSP fitting. Is turning up nothing. Spoke with Fives they said there is an adaptor, which they don't have and nobody else does either. I really don't want to discharge the system entirely and make all new fittings.
Anyone ever had this problem? What did you do?
An other suggestions would be greatly appreciated.
Thanks
problem is the fill port is a 1/4 BSP schrader valve. I have no problem recharging, however finding a female fitting to mate with the aforementioned BSP fitting. Is turning up nothing. Spoke with Fives they said there is an adaptor, which they don't have and nobody else does either. I really don't want to discharge the system entirely and make all new fittings.
Anyone ever had this problem? What did you do?
An other suggestions would be greatly appreciated.
Thanks