Apologies if this isn't the appropriate field to post!
As we have been unable to find a ready made item we are looking for someone that can make for us 2 bent tubes with BSPP threading on each side.
Each 90-degree elbow should be 1/2" swivel BSPP female (with a flat seating for an o-ring on the interior) and a 1/2" BSPP male side on the other end. The material should be either Ss304 or Ss316.
Total length should be between 70-100 mm.
If anyone can help us we would really appreciate it. We do not have a digital file for the CNC machine but here follows a digital 2D design that will further clarify .
Thank you in advance !
As we have been unable to find a ready made item we are looking for someone that can make for us 2 bent tubes with BSPP threading on each side.
Each 90-degree elbow should be 1/2" swivel BSPP female (with a flat seating for an o-ring on the interior) and a 1/2" BSPP male side on the other end. The material should be either Ss304 or Ss316.
Total length should be between 70-100 mm.
If anyone can help us we would really appreciate it. We do not have a digital file for the CNC machine but here follows a digital 2D design that will further clarify .
Thank you in advance !
Last edited: