dazz
Stainless
- Joined
- Aug 20, 2006
- Location
- New Zealand
Hi
I have a Nardini MS350 which is a lot like the MS1440 that superseded it.
I have refurbished the lathe and converted it to VFD. I have also fitted a single phase coolant pump. The problem is simply that I can't figure out the factory route for the coolant hose from the pump to the vertical pipe on the back of the saddle.
A search on Google only shows the lathe from the front. The few photos I have found viewed from the rear don't have the coolant hose fitted. The MS1140 has many similarities and the coolant hose route is probably the same.
Very rare for me to use coolant but when I do, it needs to work.
Can someone post a photo of a Nardini with the coolant hose fitted.
Dazz
I have a Nardini MS350 which is a lot like the MS1440 that superseded it.
I have refurbished the lathe and converted it to VFD. I have also fitted a single phase coolant pump. The problem is simply that I can't figure out the factory route for the coolant hose from the pump to the vertical pipe on the back of the saddle.
A search on Google only shows the lathe from the front. The few photos I have found viewed from the rear don't have the coolant hose fitted. The MS1140 has many similarities and the coolant hose route is probably the same.
Very rare for me to use coolant but when I do, it needs to work.
Can someone post a photo of a Nardini with the coolant hose fitted.
Dazz