Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
Anyone know which oil is to be used in tug 40 lathe and quantity for both the headstock and feedbox?
Thanks!
Thanks!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Which oils and quanity for a Andrychow/Toolmex Tug 40 lathe?
- Thread starter Doug W
- Start date
- Replies 4
- Views 2,991
jhruska
Titanium
- Joined
- Jul 5, 2009
- Location
- Munster, In. USA
Try this contact info from the brochure:
John
John
Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
Thanks I have that brochure.
But what I am hoping for is another TUG owner has the info rather than call a distributor about a lathe that hasn't been made in 25 years and getting oil recommendations for oil that hasn't been made in 20 years either.
Then trying to figure out what that translates to in a current product.
But what I am hoping for is another TUG owner has the info rather than call a distributor about a lathe that hasn't been made in 25 years and getting oil recommendations for oil that hasn't been made in 20 years either.
Then trying to figure out what that translates to in a current product.
Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
Come on,,, I think someone is holding out on me.
Bueller?
Bueller?
Bueller?
Bueller?
Hello Doug
I also have this machine with the tech manual and the recommended oil.
Altough this is a discontinued product the manual gives equivalence.
I ended up using an iso vg46 hydraulic oil frel shell.
I can send you a copy of the chart when back at home if you are still interested
I also have this machine with the tech manual and the recommended oil.
Altough this is a discontinued product the manual gives equivalence.
I ended up using an iso vg46 hydraulic oil frel shell.
I can send you a copy of the chart when back at home if you are still interested
