kensmachine
Cast Iron
- Joined
- Oct 17, 2012
- Location
- woodland wa
steady rest I think is for a Clausing Lathe the only casting # is SR 702 on the clamp. 5 1/8" from the outside of the vee to the outside of the flat. the vee is about 5/8" wide.about 3 1/2 center of the vee to the center of the flat. flat to brake for the hinge 6 1/4"
The follow rest I think is for a Lodge & Shipley. They had a 16" L&S there but it Had a cross slide with 2 tool posts on it so it wouldn't work on that lathe I asked the old guy what it fit and he didn't know These # were stamped into it 849 0117586 but no casting # inside of the Vee is about 5" 6" from the flat up to the center of the jaws Thanks Ken
The follow rest I think is for a Lodge & Shipley. They had a 16" L&S there but it Had a cross slide with 2 tool posts on it so it wouldn't work on that lathe I asked the old guy what it fit and he didn't know These # were stamped into it 849 0117586 but no casting # inside of the Vee is about 5" 6" from the flat up to the center of the jaws Thanks Ken
