remedialmofo
Plastic
- Joined
- Aug 3, 2015
I have not been able to run a BX22 belt for any length of time on my hot water pressure washer. I had always assumed it was the work the belt was having to do wrapping my smaller 3.15" pulley on my generator. I have had the most luck running Optibelt Super TX BX22's but rarely get more than 4 months out of them. I made a switch to a lesser brand due to easier availability and cost savings. That turned out to be a horrible idea as the last two belts only ran 41 hours and 1.5 hours. I'm currently running a un notched wrapped V belt with Kevlar cords but I seriously doubt it will be a more reliable solution than the Optibelt's I have previously run.
I'd like to run the generator with sprockets and chain. I've looked around on various sites and McMaster Carr and I'm a bit out of my realm and would greatly appreciate your help in making the transition.
I'd like to run the generator with sprockets and chain. I've looked around on various sites and McMaster Carr and I'm a bit out of my realm and would greatly appreciate your help in making the transition.