Preparing copper tube for bending? - Page 2
Close
Login to Your Account
Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22
  1. #21
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Tennessee
    Posts
    256
    Post Thanks / Like
    Likes (Given)
    69
    Likes (Received)
    66

    Default

    copper is a beautiful metal to work with. It wants to be shaped. One of my favorites, ok maybe my favorite.

  2. #22
    Join Date
    Mar 2009
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4,669
    Post Thanks / Like
    Likes (Given)
    86
    Likes (Received)
    844

    Default

    The final result. The smashed down section was right about where the tubing is going through the last wood hole. And the slight bend on the right tube had to be done to clear the strut. I ran the compressor this morning and the coil is pretty hot at the top end, too hot to touch. The bottom is cold. About 2/3 down from the top is the boundary between barely warm and stone cold. There is also drops of moisture collecting in the black filter bowl.

    dsc_0973.jpg


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •