projectnut
Stainless
- Joined
- Mar 4, 2006
- Location
- Wisconsin
I recently acquired a 12" Index brand rotary table. This table is pre Wells index in that it is labeled "Index Machine & Tool Works" with the Jackson Michigan address. It's in useable condition, but before putting it to work I was going to at least clean off the years of dirt and gunk and lube it. I was also thinking while it was apart it might be appropriate to surface grind .010" to .020" off the top to eliminate some of the past indiscretions. Fortunately I've never had to attempt to grind the top of my other rotary tables so I'm not sure if it's something that can or should be done. Any advice on the subject would be appreciated.
I would also like to know if anyone could lead me in the direction of any publications like parts list or owners manuals concerning this unit.
I would also like to know if anyone could lead me in the direction of any publications like parts list or owners manuals concerning this unit.