rivett 608 collet closer runout??
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Jul 2016
    Country
    UNITED STATES
    State/Province
    California
    Posts
    31
    Post Thanks / Like
    Likes (Given)
    20
    Likes (Received)
    1

    Default rivett 608 collet closer runout??

    I am about to pull the trigger on a Rivett 608, there are a few things that have me a bit apprehensive but mainly the way the draw bar wasn't running true when the machine was turned on... I should have taken a video... can anyone tell me if this can be adjusted or is it more likely that its been bent? The engagement lever for the carriage feed seemed a bit finicky as well and adjust this screw behind it seemed to keep it out and engaged. The belt tensioner was also not on the lathe so Im wondering if the finicky engagement was from the belt slipping... any advice is appreciated... no clue why that photo keeps uploading upside down..
    Attached Thumbnails Attached Thumbnails img_5019.jpg   img_4985.jpg  


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •