I'm interested in techniques for how to drill holes at different angles in a round part.
Like say I want to drill a hole and then drill a perpendicular hole.
There's some ways I could do this if I had special tools. If you have a super spacer it could get chucked up. Maybe an indexing head or rotary table would work the same way but I've never tried that.
I could also use a 5C collet if it was small enough to fit in there.
I've also had people print out the holes on a piece of paper and then wrap the paper around the part.
I've also tried making parts radially and transferring them to the axial part.
Is that all the ways or is there another way?
Like say I want to drill a hole and then drill a perpendicular hole.
There's some ways I could do this if I had special tools. If you have a super spacer it could get chucked up. Maybe an indexing head or rotary table would work the same way but I've never tried that.
I could also use a 5C collet if it was small enough to fit in there.
I've also had people print out the holes on a piece of paper and then wrap the paper around the part.
I've also tried making parts radially and transferring them to the axial part.
Is that all the ways or is there another way?