When I purchased my BP I was warned to never use grease on the ways. Only way oil. Being new to Mills, I never contested it and the One-Shot Oiler schematic served to enforce the use of oil only.
I have a REPRODUCED manual for my BP and I do read/refer to manuals despite what my wife might say.
Anyway, while looking at the manual this weekend I noticed “GREASE” was called out for the ways. At least in the book I have. Ref: bottom Left corner.
Just curious if anyone has the original Manual which WRONGLY states to use GREASE too.
Thanks
Leaky
I have a REPRODUCED manual for my BP and I do read/refer to manuals despite what my wife might say.
Anyway, while looking at the manual this weekend I noticed “GREASE” was called out for the ways. At least in the book I have. Ref: bottom Left corner.
Just curious if anyone has the original Manual which WRONGLY states to use GREASE too.
Thanks
Leaky