SBLatheman
Titanium
- Joined
- Jul 7, 2008
- Location
- South Bend, In
Seeking advice on installing belts. 618 MASTER B&S surface grinder
I am trying to replace the spindle drive belts(O-rings) on a 618 Brown &Sharp surface grinder. There is no adjustment of these belts, you just stretch them over the pulleys.
But…the pulleys are on opposing shafts, so all 6 belts need to go on one pulley first, then get stretched to the other pulley. There is VERY little room to accomplish this.
Any advice is appropriated
Ted
I am trying to replace the spindle drive belts(O-rings) on a 618 Brown &Sharp surface grinder. There is no adjustment of these belts, you just stretch them over the pulleys.
But…the pulleys are on opposing shafts, so all 6 belts need to go on one pulley first, then get stretched to the other pulley. There is VERY little room to accomplish this.
Any advice is appropriated
Ted