I need to look a bit outside our area for a production job we have, so it warrants trying to save a bit. I think we have decided we need to find a supplier that has competitive saw cutting to just chop stuff up for us. There are many cuts but almost all are the same length so I would think they could stack these up and make light work of it.
Some of our lengths will extend to 30ft and for some reason our locals charge 'more' for 40' sticks compared to 20' sticks.
Materials would likely be 1.5x1.5x.1875" and 2x2x.25"
We are estimating that we will ramp to around 300-400k lbs/yr but we are going to have to make our initial test order around 5k lbs while we work through R&D.
Some of our lengths will extend to 30ft and for some reason our locals charge 'more' for 40' sticks compared to 20' sticks.
Materials would likely be 1.5x1.5x.1875" and 2x2x.25"
We are estimating that we will ramp to around 300-400k lbs/yr but we are going to have to make our initial test order around 5k lbs while we work through R&D.