leeko
Stainless
- Joined
- Jun 30, 2012
- Location
- Chicago, USA
Hi everyone,
I have a piece of tooling that I think is a tension compression tap holder, but I haven't been able to find it in a lyndex catalog or via Google. Can anyone please confirm?
The holder has the following stamped on it:
Lyndex FH2-ST1.1/4/ER25 -7.75
I believe that makes it an ER25 holder on a 1-1/4" shank. The intermediate shank of the ER25 has a little twist/play in the main holder, which is why I think it might be a tension/compression holder. But before I buy a set of ER25 collets and break some taps I'd like to verify. I'll be using it in a haas minimill without rigid tapping (yet).
Thanks in advance
Lee
Sent from my SM-N960U using Tapatalk
I have a piece of tooling that I think is a tension compression tap holder, but I haven't been able to find it in a lyndex catalog or via Google. Can anyone please confirm?
The holder has the following stamped on it:
Lyndex FH2-ST1.1/4/ER25 -7.75
I believe that makes it an ER25 holder on a 1-1/4" shank. The intermediate shank of the ER25 has a little twist/play in the main holder, which is why I think it might be a tension/compression holder. But before I buy a set of ER25 collets and break some taps I'd like to verify. I'll be using it in a haas minimill without rigid tapping (yet).
Thanks in advance
Lee
Sent from my SM-N960U using Tapatalk