KenWilliams1966
Plastic
- Joined
- Oct 17, 2019
Hi All,
I was not sure exactly where to post this, so If I have posted in the wrong area, please let me know where this should be.
We are quoting a threaded component, I hope I have attached the photo properly. The icnluded angle is 20 degrees, and the small end is 1.125 in diameter, and the large end is 2.075 in diameter, and the length of the thread form is 2.85", and it looks like 8 TPI.
Has anyone ever worked with a thread like this, we have already programmed it, that is not the problem, in fact there is not a problem, I just really want to know what this type of thread is called.
I was not sure exactly where to post this, so If I have posted in the wrong area, please let me know where this should be.
We are quoting a threaded component, I hope I have attached the photo properly. The icnluded angle is 20 degrees, and the small end is 1.125 in diameter, and the large end is 2.075 in diameter, and the length of the thread form is 2.85", and it looks like 8 TPI.
Has anyone ever worked with a thread like this, we have already programmed it, that is not the problem, in fact there is not a problem, I just really want to know what this type of thread is called.