Looking for some input on finding a enclosed vibratory finisher for the shop for deburring Aluminum and sometimes steel parts that are coming off the Fadal mill. Space is a little tight in the 3 car garage for large units but 2.5-3.5 Cu ft units should fit in the spot I have picked out. Prefer a tub versus a round units to fit larger parts. Ebay is a little short on units plus not sure I want someone elses headache.
Machine specs
110v or 3 phase 208
2.5 - 3.5 Cu ft
Tub based and not round
Budget $5,000 with shipping.
enclosed for sound reasons
So far I have found the following units that fit the bill. Buddy owns a advancefinishing machine which seems to work well. Any others that I should consider?
Advancefinishing
AFT-3
NEW AFT-3 Portavibe Vibratory Tub Finisher – Advanced Finishing Technologies
Kalamazoo KVF3
Kalamazoo KVF3 Vibratory Finisher - Penn Tool Co., Inc
Machine specs
110v or 3 phase 208
2.5 - 3.5 Cu ft
Tub based and not round
Budget $5,000 with shipping.
enclosed for sound reasons
So far I have found the following units that fit the bill. Buddy owns a advancefinishing machine which seems to work well. Any others that I should consider?
Advancefinishing
AFT-3
NEW AFT-3 Portavibe Vibratory Tub Finisher – Advanced Finishing Technologies
Kalamazoo KVF3
Kalamazoo KVF3 Vibratory Finisher - Penn Tool Co., Inc