gwbolton
Aluminum
- Joined
- Jul 20, 2011
- Location
- California
that fits at the end of the surface grinder table? The sheet metal piece where the hose attaches to and is usually screwed to the table end. Thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
What do you call the dust collector attachment
- Thread starter gwbolton
- Start date
- Replies 8
- Views 892
pavt
Stainless
- Joined
- Jun 30, 2013
- Location
- 20 miles north of Buffalo NY
I call it the "dust collector attachment".
gwbolton
Aluminum
- Joined
- Jul 20, 2011
- Location
- California
I am looking to buy one and I cannot seem to hit on the correct term while I search. Hood, Shroud, Chute all tried.
howieranger
Aluminum
- Joined
- Jan 24, 2007
- Location
- Mountain Home AR.
I never found an off the shelf one for my OLD B&S 2b so I had my HVAC guy make one up $25.00 Works a treat.
crossthread
Titanium
- Joined
- Aug 5, 2004
- Location
- Richmond,VA,USA
I wanted to add one to my 6 in horizontal belt sander which creates a ton of dust. I could not find one either so I used a floor nozzle from a wet and dry shop vac. I screwed it to the back just where the dust comes off the belt and it even has a place to connect the hose. Completely solved the problem for little or nothing invested.
Rob F.
Diamond
- Joined
- Aug 5, 2012
- Location
- California, Central Coast
Use the term register, or register duct boot. These are for the round to rectangle transition in home heating ducts, that come out of the floor or ceiling.
Available in many sizes and shapes, in metal.
Here is something at lowes:
https://www.lowes.com/pd/IMPERIAL-1...Steel-90-Degree-Register-Duct-Boot/1000237503
Available in many sizes and shapes, in metal.
Here is something at lowes:
https://www.lowes.com/pd/IMPERIAL-1...Steel-90-Degree-Register-Duct-Boot/1000237503
L Vanice
Diamond
- Joined
- Feb 8, 2006
- Location
- Fort Wayne, IN
My 1929 Brown & Sharpe No. 2 surface grinder came with a dust collector hose nipple cast into the wheel guard.The left end of the table has an upright shield to deflect grit that the vacuum misses down to the table's end well. I certainly would not want my dust collector hose to be attached to the table, causing it to wear out as it moves back and forth and rubs against stationary things.
Part no. 639 is called "wheel guard."
Larry
Part no. 639 is called "wheel guard."
Larry
