moonlight machine
Diamond
- Joined
- Nov 19, 2007
- Location
- marysville ohio
One of my customers wants to retrofit a vent in the front fender of a Porsche. This is to relieve air pressure that builds up in the wheel well at high speed. This mod is worth 40 lbs of front downforce. So cutting the hole and rolling the edge is no big deal on 1 or 2 sets of fenders but my customer thinks we could be doing up to 50 sets of fenders. The material I need to form is steel .028 thick. Of course this is not flat, the opening is irregular shaped about 18" long and varies between 2" and 8" wide. I need a 3/16 or so flange in all around the opening. I can form the first one by hand and use it to make the tooling. But what to use?