Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
Got a small lot of bolt heads from a small custom target action manufacturer that is no longer making actions.
These are finished, not rejects.
Made from 4140 then properly heat treated.
Magnum bolt face
About 1.000" major bolt diameter
About 0.705 minor diameter
Sako extractor
Plunger type ejector retained with a set screw
Standard fire pin diameter.
No hole drilled for attaching to bolt body yet
$35 each shipped.
PM me if interested.
Want to make and easier to build 3 lug full diameter action, now is the chance to save a lot of work.
These are finished, not rejects.
Made from 4140 then properly heat treated.
Magnum bolt face
About 1.000" major bolt diameter
About 0.705 minor diameter
Sako extractor
Plunger type ejector retained with a set screw
Standard fire pin diameter.
No hole drilled for attaching to bolt body yet
$35 each shipped.
PM me if interested.
Want to make and easier to build 3 lug full diameter action, now is the chance to save a lot of work.
