deltaenterprizes
Stainless
- Joined
- May 9, 2006
- Location
- Longview,TX
I had a screw up while threading a $300 Krieger barrel for a trued Remington 700 action that has a 1.635”thread
The major diameter is 1.625 + .010 and the minor diameter .9980 .
I would like to make a bushing so I can wipe out the bad threads rethread the he barrel to accept a bushing to increase the barrel threads to 1.635-16.
What common fine thread should I make the barrel and inside thread of the bushing?
The major diameter is 1.625 + .010 and the minor diameter .9980 .
I would like to make a bushing so I can wipe out the bad threads rethread the he barrel to accept a bushing to increase the barrel threads to 1.635-16.
What common fine thread should I make the barrel and inside thread of the bushing?