MonCeret Gunsmit
Aluminum
- Joined
- Aug 23, 2018
- Location
- E. TN
I have 88% of everything I need to start doing Cerakote. I just need an oven and some really minor bits (barrel plugs, etc.)
I want to build a cheap oven that easy to put barrels in. I was thinking about finding one of these really cheap long gun security cabinets. Which is basically a heavy sheet metal box.
We got loads of thrift stores around me and they are always full of toaster ovens... I thought I could dissect 2-4 taster oven and put the heating elements inside the gun cabinet, and use their thermostat. This keeps me on 110v so I don't have to wire in an entire new 220V circuit in my (home) garage.
I figured I could mount mylar covered foam board insulation (Lowes/Home Depot) on the sides and top of the cabinet providing the label says it can handle the 300 deg.
So that's my brain storm...
Thoughts? Any kinda standard DIY ways guys go about it?
I want to build a cheap oven that easy to put barrels in. I was thinking about finding one of these really cheap long gun security cabinets. Which is basically a heavy sheet metal box.
We got loads of thrift stores around me and they are always full of toaster ovens... I thought I could dissect 2-4 taster oven and put the heating elements inside the gun cabinet, and use their thermostat. This keeps me on 110v so I don't have to wire in an entire new 220V circuit in my (home) garage.
I figured I could mount mylar covered foam board insulation (Lowes/Home Depot) on the sides and top of the cabinet providing the label says it can handle the 300 deg.
So that's my brain storm...
Thoughts? Any kinda standard DIY ways guys go about it?