silver star
Aluminum
- Joined
- Sep 19, 2013
- Location
- OK USA
My searches did not bring much up on this subject but seems like I have seen threads on it.
I am gathering to build a 2011 Government in 10mm.
I am going to ream a 40 S&W Bull barrel for the 10mm.
I have most every thing else except a 40 Slide.
I have a new 9mm STI slide and I am trying to find out what the process is to open up the breach to 10mm specs and what that would involve.
I think I know the breach face is at a 1 degree angle.
I'm hoping indicating the with of the breach equally from 9mm to 10mm would be as simple as using a pillar file. But that seems to easy.
Any thoughts and / or suggestions and / or links would be most welcome.
Thanks for your time,
Michael
I am gathering to build a 2011 Government in 10mm.
I am going to ream a 40 S&W Bull barrel for the 10mm.
I have most every thing else except a 40 Slide.
I have a new 9mm STI slide and I am trying to find out what the process is to open up the breach to 10mm specs and what that would involve.
I think I know the breach face is at a 1 degree angle.
I'm hoping indicating the with of the breach equally from 9mm to 10mm would be as simple as using a pillar file. But that seems to easy.
Any thoughts and / or suggestions and / or links would be most welcome.
Thanks for your time,
Michael