hillriver171
Plastic
- Joined
- Feb 7, 2021
Hello
I was wondering if anyone would have any ideas on how I could get my lathe to single point thread 28 and 32 tpi. I’m going to thread the muzzle of my rifle for a brake , and just about every one out there is 28 and 32 tpi . The lathe is a late 80s 17x40 enco engine lathe.
The lathe cuts 1/n”
14,16,20,24,36,40
7, 8,11,12,18,20
3.5,4,5.5,6, 9,10
1.75,2,2.75,3,4.5,5
The gears are 91 / 96 with a 100 idler
I was wondering if anyone would have any ideas on how I could get my lathe to single point thread 28 and 32 tpi. I’m going to thread the muzzle of my rifle for a brake , and just about every one out there is 28 and 32 tpi . The lathe is a late 80s 17x40 enco engine lathe.
The lathe cuts 1/n”
14,16,20,24,36,40
7, 8,11,12,18,20
3.5,4,5.5,6, 9,10
1.75,2,2.75,3,4.5,5
The gears are 91 / 96 with a 100 idler