mfisher
Hot Rolled
- Joined
- Oct 24, 2006
- Location
- Annapolis, Maryland
From the looks of it, the 80% AR style 80% receivers could be finished off in just a couple of hours, using jigs (plus then debur, cleanup, prep and anodize). Also seems that the jigs aren't all that critical for locating cuts (assuming decent skill level, and capabilities to measure and indicate under 0.001), but make holding the receiver much easier.
I'm thinking of this as a one or two off personal use project, no manufacturing.
Never tried one of course. Any input on the need for using the jigs?
Do used jigs ever show up for sale? Leaning towards the AR-10.
Again, this is a for the fun of it, not for production or to save money over buying a complete rifle neccesarily.
I'm thinking of this as a one or two off personal use project, no manufacturing.
Never tried one of course. Any input on the need for using the jigs?
Do used jigs ever show up for sale? Leaning towards the AR-10.
Again, this is a for the fun of it, not for production or to save money over buying a complete rifle neccesarily.