M12 Winchester
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2

Thread: M12 Winchester

  1. #1
    Join Date
    Dec 2004
    Location
    Batchelor, La. 70715
    Posts
    91
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    I picked up another barrel for a customer's gun and it won't screw in with the factory bushing. Lacks about .030 for the extention to contact the frame 'cause the barrel is already touching the headspace ring. I know I can get shims to move the extension to the rear (if I can break it loose) but it appears to me that this might cause the front sight to offset enough to be noticeable. Any opinions on chucking the barrel in the lathe and facing off the rear end until it will screw in?

  2. #2
    Join Date
    Feb 2001
    Country
    UNITED STATES
    State/Province
    Arizona
    Posts
    2,203
    Post Thanks / Like
    Likes (Given)
    4
    Likes (Received)
    334

    Post

    Might that make the chamber too short?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •