justashooter
Plastic
- Joined
- Mar 5, 2005
- Location
- pennsylvania
Frank Dehass says that Carcano rifles have a 1.065 X approximately 14 pitch barrel to receiver ring thread mate. I see a source for cheap barrels that are threaded 27mm x 2mm, and see a source for 27mm X 2mm taps. The threaded interface in a carcano receiver ring is about .650" shank length. The threaded shank on the potential barrel is about .500".
27mm is 1.06299.
2mm pitch is about 12.7 TPI.
14 pitch would be 1.814mm thread
1.75mm pitch would be 14.514" pitch
I have a spare carcano barrel at home, but can't get to it to determine with a caliper exactly what "approximately 14 pitch" means; whether it is less than or more than 14 pitch.
How does the forum feel about containing a 35 Remington chamber loaded to 40KSI standard factory ballistics with such a re-threaded receiver ring?
27mm is 1.06299.
2mm pitch is about 12.7 TPI.
14 pitch would be 1.814mm thread
1.75mm pitch would be 14.514" pitch
I have a spare carcano barrel at home, but can't get to it to determine with a caliper exactly what "approximately 14 pitch" means; whether it is less than or more than 14 pitch.
How does the forum feel about containing a 35 Remington chamber loaded to 40KSI standard factory ballistics with such a re-threaded receiver ring?