sirAIG
Aluminum
- Joined
- Jan 10, 2019
- Location
- State College
My machine is tool changer-less. On power restart, the machine will travel to z + 4.510". If you jog the machine down, at any point above z = 0, you cannot jog back up.
Im assuming this is used for the actual tool change routines. Im curious if those travels can be accessed via g code. Calling off machine coordinates will not allow it to travel there.
Im assuming this is used for the actual tool change routines. Im curious if those travels can be accessed via g code. Calling off machine coordinates will not allow it to travel there.