hend.engineering
Aluminum
- Joined
- Jul 30, 2019
Hi,
Very slowly getting to the bottom of a major problem with my VF-OE, mostly backwards steps but anyway...
Long story short, issue with drive amps has burnt out a track on the central board, fixed that but am curious about what voltages I should be measuring on the rainbow coloured ribbon cable?
Currently from blue to brown I have got 200v, nothing, 24v, nothing, earth and earth.
Does that tally?
If not, any ideas what they should be?
Pretty sure I had measured the blue strand at only 19v previously, but have mislaid my notes.
Thanks in advance,
Tom.
Very slowly getting to the bottom of a major problem with my VF-OE, mostly backwards steps but anyway...
Long story short, issue with drive amps has burnt out a track on the central board, fixed that but am curious about what voltages I should be measuring on the rainbow coloured ribbon cable?
Currently from blue to brown I have got 200v, nothing, 24v, nothing, earth and earth.
Does that tally?
If not, any ideas what they should be?
Pretty sure I had measured the blue strand at only 19v previously, but have mislaid my notes.
Thanks in advance,
Tom.