b axis homed to different position

astropaulo · Nov 6, 2020

I have TR160 that I got recently. I noticed that it has homed to 2 different positions on the B axis when running the start up routine. Anyone else seen this issue? Does haas use an absolute encoder on the B axis or is there a home sensor? It seems the only cause could be a loose part.

coyoinu · Nov 6, 2020

if you set the tool change offset, that sets the primary home reference point, you can change this in Settings - > Rotary (assuming this is NGC).

There are also configurable user positions in Settings - > User Positions, hit F1 to display all the values, and origin to clear anything lingering. Maybe you have an intermediate position value active?

If your B decides to home to different positions randomly, that may be a more serious problem you'll want to talk to your HFO about.

Search

Largest Manufacturing Technology Community on the Web

Search

b axis homed to different position

astropaulo

Aluminum

coyoinu

Aluminum

Similar threads