abbeyroad1124
Plastic
- Joined
- Feb 8, 2021
The Z-axis bearing block never comes all the way to the end of the rail: I supposed Haas was building in a factor-of-safety.
This means, in theory, if I moved my limit switch I could make use of another 1-inch of rail, and get 1-inch more of Z travel out of my Haas.
Now I checked the ball-screw and counter-balance piston-rod and I have an inch of space there too.
So.....
HAS ANYONE TRIED THIS?
(BTW I have not measured, so when I say "1-inch" this is an eye-balling guess.)
This means, in theory, if I moved my limit switch I could make use of another 1-inch of rail, and get 1-inch more of Z travel out of my Haas.
Now I checked the ball-screw and counter-balance piston-rod and I have an inch of space there too.
So.....
HAS ANYONE TRIED THIS?
(BTW I have not measured, so when I say "1-inch" this is an eye-balling guess.)