Shawn_Laughlin
Aluminum
- Joined
- Mar 28, 2019
I’ve been asking a few questions on here and y’all have been extremely helpful but I’ve got one more.
So,I’ve decided on the vf5ss with hrt310 and couple other options but In order to get my slab done,I need specs on the building and the door size needed to fit a vf5ss through is going to determine eve height and eve height will determine if I have to request the city inspector for a 2’ allowance over max allowed eve height.
I know it sounds like a lazy question but I’ve looked at the haas drawing and I can’t pull the pdf’s up and the installion documents just list maximum working height and I need to know when it arrives new and it’s gotta through that opening what size opening do I need and not be squeezing it through? It does mention width sorry.
I’ve gotten tanks that are 2-1/2 times the width of the shop door through at work,just took a good bit of forward turn,shimmy over and repeat but I got it through. I don’t want to have to do that With the machine.
So,I’ve decided on the vf5ss with hrt310 and couple other options but In order to get my slab done,I need specs on the building and the door size needed to fit a vf5ss through is going to determine eve height and eve height will determine if I have to request the city inspector for a 2’ allowance over max allowed eve height.
I know it sounds like a lazy question but I’ve looked at the haas drawing and I can’t pull the pdf’s up and the installion documents just list maximum working height and I need to know when it arrives new and it’s gotta through that opening what size opening do I need and not be squeezing it through? It does mention width sorry.
I’ve gotten tanks that are 2-1/2 times the width of the shop door through at work,just took a good bit of forward turn,shimmy over and repeat but I got it through. I don’t want to have to do that With the machine.