countryguy
Hot Rolled
- Joined
- Jul 29, 2014
- Location
- Mich, USA
Hi folks; A spurious error today on B of the TRT210.
Error 192;B Axis Z Ch Missing when doing some manual work at full speed.
-Note1: The kid spins the remote wheel super fast on max speed as he's setting up stuff. just 'slinging' that wheel.
-Note2: The Son also recently moved the Max Speed parm for B platter from 16K to like a 25K value. (he has photos).
First time we've ever seen this one. Anyone seen this and done anything preventative or to repair/stifle
The 1999 Haas VMC service manual also lists this as Error 153. (same as) and to check P1-P4 connectors.
But for a 4th and 5th... I think this would be MOCON P30 for B. Confirming they are suggestion the Mocon Enc. plugs?
Pg 263 VMC Haas manual, MOCON:
P7 670 Y ENCODER INPUT Y ENCODER
P8 680 Z ENCODER INPUT Z ENCODER
P9 690 A ENCODER INPUT A ENCODER
P30 690B B ENCODER INPUT B ENCODER
Error txt per manual:
153 X-axis Z Broken wires or encoder contamination. All servos are turned off. This can also be caused by loose connectors at P1-P4.
154 Y-axis Z Same as alarm 153.
...
191 B Limit Switch Same as alarm 145.
192 B Axis Z Ch Missing Same as alarm 153.
Error 192;B Axis Z Ch Missing when doing some manual work at full speed.
-Note1: The kid spins the remote wheel super fast on max speed as he's setting up stuff. just 'slinging' that wheel.
-Note2: The Son also recently moved the Max Speed parm for B platter from 16K to like a 25K value. (he has photos).
First time we've ever seen this one. Anyone seen this and done anything preventative or to repair/stifle
The 1999 Haas VMC service manual also lists this as Error 153. (same as) and to check P1-P4 connectors.
But for a 4th and 5th... I think this would be MOCON P30 for B. Confirming they are suggestion the Mocon Enc. plugs?
Pg 263 VMC Haas manual, MOCON:
P7 670 Y ENCODER INPUT Y ENCODER
P8 680 Z ENCODER INPUT Z ENCODER
P9 690 A ENCODER INPUT A ENCODER
P30 690B B ENCODER INPUT B ENCODER
- Beides P30, WE'll reseat everything along the chain of cables. pulled side, pulled encoder cap.. replugged the mini-sip connector(s) so far. on and on we go... ;-)
Error txt per manual:
153 X-axis Z Broken wires or encoder contamination. All servos are turned off. This can also be caused by loose connectors at P1-P4.
154 Y-axis Z Same as alarm 153.
...
191 B Limit Switch Same as alarm 145.
192 B Axis Z Ch Missing Same as alarm 153.