D.D.Machine
Stainless
- Joined
- Dec 10, 2003
- Location
- poulsbo, wa, usa
First off I am "NOT" a lathe guy ,,, so I`m cutting a 24TPI Left hand od thread or trying to and I keep alarming out …
T0505
M04 S1000
M08
G0 Z1.6
G0 X.370
G76 X.324 Z.95 K.023 D.01 F0416
M05
M09
Do to it being a long skinny part I have it double feeding that is why the Z is in behind part face . I have looked at it for hours and it all looks good to me but I am use to using double like G76 and not this single line code.
T0505
M04 S1000
M08
G0 Z1.6
G0 X.370
G76 X.324 Z.95 K.023 D.01 F0416
M05
M09
Do to it being a long skinny part I have it double feeding that is why the Z is in behind part face . I have looked at it for hours and it all looks good to me but I am use to using double like G76 and not this single line code.