H&T agreement + probing
Close
Login to Your Account
Likes Likes:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Nov 2020
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default H&T agreement + probing

    I want to turn H&T code agreement off to use the whole tool table on my CM-1, but does that break tool probing? The parameters for P9023/P9853 seem to only have the Tool number, not a length or diameter offset into the table, so both measuring and break detection wouldn't work? I am not opposed to writing new macros, just hoping I am missing something and they aren't needed.

  2. #2
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    1,725
    Post Thanks / Like
    Likes (Given)
    1149
    Likes (Received)
    1806

    Default

    I have H&T code agreement turned off with no effect on measuring tools.
    On mine, tool breakage won't work with it turned on.

  3. #3
    Join Date
    Nov 2020
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Quote Originally Posted by Booze Daily View Post
    I have H&T code agreement turned off with no effect on measuring tools.
    On mine, tool breakage won't work with it turned on.
    Can you show your tool measuring code line? Thanks!

  4. #4
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    1,725
    Post Thanks / Like
    Likes (Given)
    1149
    Likes (Received)
    1806

    Default

    junk.jpg

    ...

  5. #5
    Join Date
    Nov 2020
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    But that only has the T number, how would you tell it to update H175 instead of H1?

  6. #6
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    1,725
    Post Thanks / Like
    Likes (Given)
    1149
    Likes (Received)
    1806

    Default

    I suppose you could read and reassign the system variable for H1. You can also use G10 to set length, dia, etc. I don’t think there is a way to strictly use the probing routine though.

  7. #7
    Join Date
    Nov 2020
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    In case anyone finds this in the future, the key is the P9853 routine. It will take a tool an an offset:

    G65 P9853 B1. T8.112

    B1. = non rotating length measurement
    T8 = tool changer pocket number (1-20 on my machine)
    .112 = tool table offset to update (1-200)


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •