BentRiverTech
Plastic
- Joined
- Mar 24, 2021
Hi,
Has anyone ever experienced an older Haas not feeding on a rigid tapping cycle? The spindle just sits there in location and spins. The spindle doesn't even retract. It goes into position, spins at RPM, but doesn't feed down or up once it engages the tapping cycle. The machine then gets stuck thinking it can't do anything else but stay there because it thinks it's in the middle of a tapping cycle.
I'm lost on this one. A week prior my guy bottomed out a tap while tapping and the tap broke in the hole. Ever since then, the tapping cycle refuses to work correctly. We used a compression-style tapping head too. Small tap.
Any ideas?
Thanks for your help!
Has anyone ever experienced an older Haas not feeding on a rigid tapping cycle? The spindle just sits there in location and spins. The spindle doesn't even retract. It goes into position, spins at RPM, but doesn't feed down or up once it engages the tapping cycle. The machine then gets stuck thinking it can't do anything else but stay there because it thinks it's in the middle of a tapping cycle.
I'm lost on this one. A week prior my guy bottomed out a tap while tapping and the tap broke in the hole. Ever since then, the tapping cycle refuses to work correctly. We used a compression-style tapping head too. Small tap.
Any ideas?
Thanks for your help!