Hi,
So I received a HAAS SL10, manufactured in '08, I got it preped and powered up. This is the first time working on a Haas, I have worked on a takisawa with fanuc controller a long time ago. And I'm having a really hard time understanding whats going on with the work offset.
I followed the manual to set up a tool, tool 2. And measured x, measured z, and set z face measure on the work offset page under G54. So far so good, the tool offsets are calculated correctly. But the position panel is showing the same x and z for operator, work g54 and machine coordinates which are based on machine zero.That is the top right corner where the turret goes after power on restart.
If I change the tool all coordinates system stay the same, although the next tool has other offsets.
So my question is what do I have to do to update the g54 (or the current work offset, which happens to be G54) based on the measured tool offsets?
If anyone can help I would be indebted!
<a href="https://imgur.com/C7KkUVk"><img src="https://i.imgur.com/C7KkUVk.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/qoDdKiq"><img src="https://i.imgur.com/qoDdKiq.jpg" title="source: imgur.com" /></a>
So I received a HAAS SL10, manufactured in '08, I got it preped and powered up. This is the first time working on a Haas, I have worked on a takisawa with fanuc controller a long time ago. And I'm having a really hard time understanding whats going on with the work offset.
I followed the manual to set up a tool, tool 2. And measured x, measured z, and set z face measure on the work offset page under G54. So far so good, the tool offsets are calculated correctly. But the position panel is showing the same x and z for operator, work g54 and machine coordinates which are based on machine zero.That is the top right corner where the turret goes after power on restart.
If I change the tool all coordinates system stay the same, although the next tool has other offsets.
So my question is what do I have to do to update the g54 (or the current work offset, which happens to be G54) based on the measured tool offsets?
If anyone can help I would be indebted!
<a href="https://imgur.com/C7KkUVk"><img src="https://i.imgur.com/C7KkUVk.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/qoDdKiq"><img src="https://i.imgur.com/qoDdKiq.jpg" title="source: imgur.com" /></a>