Hello all, this will be my first time using a bar feeder. What i am trying to do is a double push on the stock. I will use the control variables for the first push, which will be 0.750. I will face,chamfer, put a flat and drill a radial whole. Then i will need to do another bar push for length. The question i have is when you use the optional variables J do you set those numbers as an incremental move from the first push or is it an absolute number from the end of the part.
The machine is SL30 T.
The total part length is 2.835 inches with a 3/8 bar stock.
Thank you.
The machine is SL30 T.
The total part length is 2.835 inches with a 3/8 bar stock.
Thank you.