Haas SL30:noob to live tooling

Part Dim: 2 inch diameter with a face slot .200 deep across the full face. The machine has axial live tools with c-axis, no y axis.

Hello All, Can someone give me and example of a g code program to do this on a Haas machine?

Thank You
Frankie

Edit: the slot width is 1 inch and i am using a 1/2 inch endmill.

Here ya go. Posted for Fanuc but should be about the same. Not sure what material and endmill you are using so you may have to mess with the feed and speed.

Dry run this back from the part........


MANUFACTURING OPERATION SHEET


Part: FM1
Setup: Setup1 (1 of 1)
Date: Monday, July 01, 2019 07:53:06
Time: 0:53.9
Stock: Z (0.0000 in., -3.0000 in.) x OD 2.0000 in.
Mat: STEEL-10XX, 111.00 Brinell,1.40 HP min/in^3


Op: 1 side1 (rough1), Fixture 1
F/S: 2635 RPM, 26.4 IPM (0.0025 IPT)
Tool: #1, Comp: #1, Offset: #1, ID: 1 (.5 Varimill-rotary Z, 0.5000 in.)
Depth: 0.2000 in.
Other: Stepover: 0.1665 in.
Time: 0:37.9
Power: 1.23 (est. 1.23) HP


Op: 2 side1 (finish), Fixture 1
F/S: 3162 RPM, 20.6 IPM (0.0016 IPT)
Tool: #1, Comp: #1, Offset: #1, ID: 1 (.5 Varimill-rotary Z, 0.5000 in.)
Depth: 0.2000 in.
Other: Stepover: 0.0150 in.
Time: 0:16.0
Est. HP: 0.09






%
O0001 ( Featurecam 7-1-2019 )
( Posted for : Generic Fanuc with C axis )


N1 ( MILLING on MAIN SPINDLE )
( ROUGH1 SIDE SIDE1 )
G28 U0.
G30 W0.
G0 G17 G20 G40 G80 G98
M62 ( Door Close )
M43
G28 H0.
G97 S2635 M13
T0101
G0 Z1.0
X2.2862 C0. M8
G12.1
G1 X-0.137 C1.141 F50.0
Z0.1
Z-0.2 F13.2
C-1.141 F26.3
X0.137
C1.141
X0.47
C-1.141
X-0.47
C1.141
G13.1


( OPERATION: FINISH SIDE SIDE1 )
G97 S3162 M13
G1 Z-0.2
G12.1
G1 X-0.47 F50.0
X-0.5 F20.6
C-1.141
X0.5
C1.141
Z1.0 F50.0
G13.1
M15
M9
G28 U0.
G30 W0.
M61 ( Door Open )
M30
%

Thank you for the input.