I am trying to mill two flates with a radial live tool and the c-axis. I will be using the tail stock on this part so i will not have the clearance to use axial live tooling. I am wanting to do this in one setup. Which plane would you use and would you still use a g112? Is there a way to add a depth of cut?
I will be using a 1/2 inch endmill.
The print is attached.
Thank You
Frankie
<a href="https://imgur.com/4ksRB6o"><img src="https://i.imgur.com/4ksRB6o.jpg?1" title="source: imgur.com" /></a>
I will be using a 1/2 inch endmill.
The print is attached.
Thank You
Frankie
<a href="https://imgur.com/4ksRB6o"><img src="https://i.imgur.com/4ksRB6o.jpg?1" title="source: imgur.com" /></a>
