Haas ST-30 Will Not Home
Close
Login to Your Account
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2021
    Country
    UNITED STATES
    State/Province
    Kentucky
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    4

    Default Haas ST-30 Will Not Home

    I have a Haas ST-30 that will not power up past the X axis home position. The machine reaches the X axis home position, the display says running and there is no alarm. The proximity sensors seem to be working and no cables appear to be broken. Could this be a parameter issue?

  2. #2
    Join Date
    May 2021
    Country
    UNITED STATES
    State/Province
    Kentucky
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    4

    Default

    Quote Originally Posted by dwest View Post
    I have a Haas ST-30 that will not power up past the X axis home position. The machine reaches the X axis home position, the display says running and there is no alarm. The proximity sensors seem to be working and no cables appear to be broken. Could this be a parameter issue?
    After further attempts to resolve this issue I realized my tailstock pressure was set too low not allowing the tailstock to return to home.

  3. Likes MaletaBG, kustomizer, Orange Vise, Chris59 liked this post
  4. #3
    Join Date
    Feb 2012
    Location
    California
    Posts
    1,621
    Post Thanks / Like
    Likes (Given)
    991
    Likes (Received)
    1839

    Default

    Quote Originally Posted by dwest View Post
    After further attempts to resolve this issue I realized my tailstock pressure was set too low not allowing the tailstock to return to home.
    Thanks for following up!

    I'm sure this post will be of help to someone else in the future.

  5. Likes Chris59 liked this post

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •