Howdy all, I'm new to the phase converter game and have some questions.
I currently have a UMC-500 which Haas rates at 30hp in my barn which I was hoping could be powered by my American Rotary AUL-75, which is rated for 37.5hp.
The AUL-75 requires a 200amp breaker, that doesn't leave me any wiggle room for spare amps, as I currently have a 200amp service coming into the barn. I'm planning on upgrading to a 400amp service later this year. Until then, I need to get this spindle turning!
So I was wondering what your thoughts on running a AUL-40 {125amp breaker) until I can upgrade my service. I take light and fast cuts and rarely see spindle loads if ever above 25%
Thank you!
I currently have a UMC-500 which Haas rates at 30hp in my barn which I was hoping could be powered by my American Rotary AUL-75, which is rated for 37.5hp.
The AUL-75 requires a 200amp breaker, that doesn't leave me any wiggle room for spare amps, as I currently have a 200amp service coming into the barn. I'm planning on upgrading to a 400amp service later this year. Until then, I need to get this spindle turning!
So I was wondering what your thoughts on running a AUL-40 {125amp breaker) until I can upgrade my service. I take light and fast cuts and rarely see spindle loads if ever above 25%
Thank you!