ForcedFour
Plastic
- Joined
- Apr 3, 2019
So I am new to a Haas machine and I recently purchased a 2000 Haas VF1. I am having trouble with peck drilling with G83 in that the machine errors with "Invalid I, j, k". In the book it calls I, J, and K commands optional and I have omitted them as I don't wish to use them at this time.
This is my code section, it errors/stops after the first hole drill. Suggestions?
This is my code section, it errors/stops after the first hole drill. Suggestions?
Code:
G83 X0.7385 Y-0.4375 Z-0.625 Q0.21 R0.125 F20.0
G83 X0.7235 Y-2.1875 Z-0.625
G83 X3.2765 Y-2.0995 Z-0.625
G83 X4.7235 Y-2.1875 Z-0.625
G83 X4.7385 Y-0.4375 Z-0.625
G83 X3.2615 Y-0.5255 Z-0.625
G83 X7.2615 Z-0.625
G83 X8.7385 Y-0.4375 Z-0.625
G83 X8.7235 Y-2.1875 Z-0.625
G83 X7.2765 Y-2.0995 Z-0.625
G83 X11.2765 Z-0.625
G83 X11.2615 Y-0.5255 Z-0.625